These are simply created by laying a good woven weed-guard membrane (Plantex or similar) over the area and laying approx. 2-inches of gravel over the surface. Areas are usually embellished with stepping stones or random slabs, planting, water-features and pots.
Metal or wooden gates can be installed with hinges, latches, bolts, jockey wheels, drop bolts etc. depending on the size and style of gate. Gates are secured to timber wall plates fixed onto buildings or posts concreted-into the ground.
Posts can be wooden or concrete and are always concreted-in. Post-caps and finials can be added to wooden posts and wooden or concrete gravel boards can be laid to protect the bottom of fence/trellis from rotting in the soil. Panels come in a large variety of styles and can be inserted between posts, or for
Decking can be laid onto a solid surface or raised off the ground. Where it comes onto contact with the house, the finished height of the deck should be 2 bricks below the damp proof course.Where it is raised off the ground, posts are either driven or concreted-in to position, depending on the height and
Often used around decking or patios, ballustrading comes in numerous forms. Mostly, 4-inch square wooden posts are screwed to deck frame or concreted-in, with a wooden hand rail screwed top and bottom to form bays. Each bay can have wooden spindles or wooden/metal panels fitted between to finish.
Soak-away’s have been revolutionised with the introduction of Aquacell units. These are strengthened plastic cells (1mx0.5mx0.4m) with a 95% void capacity (holds 190 litres of water). In short, one cell holds the equivalent of a 1.5mx1mx1m traditional gravel-filled soak-away. So there is consequently less to remove and dispose of and less to fill-in. They are
Covers come as either standard plastic, aluminium or steel lids or as recessed ‘trays’. These units allow block pavers, slabs, etc. to be cut into the lid to provide a seamless finish. Usually the 4 corners of the lid have holes where lifting keys can be inserted to raise the lid when necessary. Existing chambers
Where provision of drainage is required, we mostly use Aco channel drains. These are either made of a resin polymer with a galvanised silver grate or from black moulded plastic. Both are laid on a bed of wet mortar and piped into either existing drains or into a new soak-away (where necessary)
Acrylic or polyurethane sealant can be applied to block-paved and resin bonded drives to provide protection from weathering, discolouration and weed growth. The sealant makes the sand between the joints in block-paving set hard. Acrylic sealant can be applied using a sprayer, polyurethane is applied with a roller. Edges are taped to protect areas from
A 2-inch compacted screed of sand is laid over the compacted foundation, with a membrane laid between sand and the Aco Ground Guard tiles (for large areas). The tiles interlock and are cut to size on-site to fit edges. The tiles are pinned every 2m to give extra strength and can be filled with gravel
We are currently looking to recruit an experienced landscaper to join our team. If you would like to find out more, please email your CV and details to: [email protected]